Latest  Articles

How to install a Drivekey
- Complete guide - step-by-step tutorial

First watch TechSick's Video Guide - How to install a Drivekey - Complete guide - step-by-step tutorial.


  If you like this article help us and Digg it :-)


To install the DriveKey Modchip in your Wii, you will first need to follow our Guide to dissassemble the Wii.

You will also need:

A DriveKey

Electrical Tape

Triwing screwdriver (for opening the Wii)

Once your Wii is apart and the dvd drive is removed, grab your DriveKey modchip.
Cover the back of the chip in electrical tape.



Check the dip switches on the DriveKey and configure them to your region.



The ribbon cable that goes to your Wii console should be connected to the plug labelled 'Wii'.
The ribbon cable that comes with the DriveKey should be connected to the plug labelled 'DVD'.



The other end of the ribbon should be connected to the Wii DVD Drive.

Position the DriveKey modchip on the metal of the Wii console.
Place it so none of the ribbon cables will be damaged when the console is re-assembled and stick it down with electrical tape.
Make sure you use enough to completely cover the DriveKey modchip.
Thats it.
Congratulations.





Also Check out:

- TechSick's Video Demonstration of USB iSO Loader already working on the Wii (Click Here)
A quick video demonstration of USB iSO Loader already installed and working on the Wii.

- TechSick's Video Guide & Tutorial - How to install USB iSO Loader on the Wii (Click Here)
It is a complete guide on how to install The Homebrew Channel, Custom Firmware(cIOS36_rev9) and USB iSO Loader. Also includes a Video Demonstration of the whole installation.

- TechSick's Video Guide & Tutorial - How to use WBFS and USB iSO Loader to Backup Wii games to your computer (Click Here)
It is a complete guide on how to use WBFS GUI v9 and USB iSO Loader to Backup Wii games to your computer. Also includes a Video Demonstration.



More Info coming soon :-)